- 900 W / 1440 VA pure sine-wave output (<5% THD) supports sensitive active-PFC power supplies
- Boost and Trim AVR regulates 93 V to 130 V utility swings without draining battery cycles
- All eight NEMA 5-15R outlets provide both battery backup and 680-Joule surge protection
- User-replaceable 288 VAh RBC6 battery cartridge with 3-hour recharge and SmartConnect Ethernet monitoring
- Lacks a SmartSlot for local SNMP cards, switched outlet groups, and automatic internal bypass failover
- Cooling fan hits 45.0 dBA at 1 meter with a mild transformer hum during battery load or recharging
- Default input sensitivity can cause nuisance battery transfers on noisy lines until lowered on the LCD
Overview
Workstations and active-PFC server power supplies hate cheap stepped-approximation battery backups, which makes clean sine-wave output the baseline requirement for serious desktop or small-closet protection. Built around a line-interactive topology with ENERGY STAR V2.0 Green Mode, this 1440 VA / 900 W tower cleans up incoming utility power using Boost and Trim automatic voltage regulation across a 93 V to 130 V window (expandable to 85 V to 136 V). When wall power drops completely, it transfers to the inverter in 6 ms typical (10 ms maximum) with pure sine-wave output kept under 5% total harmonic distortion.
Physically, the unit is a dense 44.31 lbs (20.1 kg) tower built around a user-replaceable 288 VAh RBC6 sealed lead-acid cartridge that recharges in roughly three hours. Every one of its eight NEMA 5-15R outlets receives both battery backup and 680 Joules of surge protection, though there are no individually switched outlet banks for remote power cycling. It stays quiet on steady wall power, yet battery operation or active recharging spins up the internal cooling fan to 45.0 dBA at 1 meter alongside a mild transformer hum—noticeable enough that you will want it tucked under a desk or in a utility closet rather than at ear level.
Daily management relies on a front LCD panel, USB and Serial ports for PowerChute software, and an onboard SmartConnect Ethernet port for cloud-based status monitoring. On noisy utility lines, the factory input sensitivity setting can trigger nuisance transfers to battery power, though stepping that threshold down via the front screen clears it up quickly. The bigger architectural omissions are aimed squarely at price segmentation: there is no SmartSlot expansion bay for local SNMP cards and no automatic internal bypass failover, keeping this firmly in home-office and small-closet territory rather than mission-critical racks.
Technical Specifications
| Model | SMC1500C |
| Form Factor | Tower |
| Topology | Line-interactive (ENERGY STAR V2.0 Green Mode) |
| Capacity | 1440 VA / 900 W |
| Nominal Input Voltage | 120 V |
| AVR Input Voltage Window | 93 V to 130 V (default); 85 V to 136 V (expandable) |
| Output Waveform | Pure sine wave (<5% THD) |
| Transfer Time | 6 ms typical (10 ms max) |
| Outlets | 8x NEMA 5-15R (all battery backup and surge protected) |
| Surge Energy Rating | 680 Joules |
| Battery Type | User-replaceable 288 VAh RBC6 sealed lead-acid cartridge |
| Recharge Time | 3 hours (typical) |
| Management Interfaces | Front LCD panel, USB, Serial (PowerChute), SmartConnect Ethernet port |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Acoustic Noise (Load / Recharge) | 45.0 dBA at 1 meter |
| Weight | 44.31 lbs (20.1 kg) |
| Warranty | 2 years |
Primary Sources & Audited Citations
Recommended Alternatives in Power Stations & UPS
At a Glance
How reliable is the APC Smart-UPS 1500VA SMC1500C according to Mizex audits?
Buy this if you need clean 900 W sine-wave backup with easy battery swaps and cloud monitoring for a workstation or home server; look at an enterprise Smart-UPS SMT unit if you require local SNMP cards, switched outlet groups, or automatic bypass failover.
What are the known quirks or drawbacks of the APC Smart-UPS 1500VA SMC1500C?
Our reliability audit identified the following documented caveats:
- Lacks a SmartSlot for local SNMP cards, switched outlet groups, and automatic internal bypass failover
- Cooling fan hits 45.0 dBA at 1 meter with a mild transformer hum during battery load or recharging
- Default input sensitivity can cause nuisance battery transfers on noisy lines until lowered on the LCD
What are the key engineering highlights of the APC Smart-UPS 1500VA SMC1500C?
The top strengths recorded in our evaluation include:
- 900 W / 1440 VA pure sine-wave output (<5% THD) supports sensitive active-PFC power supplies
- Boost and Trim AVR regulates 93 V to 130 V utility swings without draining battery cycles
- All eight NEMA 5-15R outlets provide both battery backup and 680-Joule surge protection
- User-replaceable 288 VAh RBC6 battery cartridge with 3-hour recharge and SmartConnect Ethernet monitoring