Overview
Occupying a compact 315 x 210 x 395 mm footprint on the desk, the chassis integrates a 270-degree pillarless dual-panel tempered glass design that eliminates structural corner posts between the front and left side. Tool-free quick-release retention clips secure the glass sheets, permitting immediate access to the interior chamber while maintaining flush panel alignment across the exterior seams. A net weight of 3.94 kg provides a balanced structural baseline for micro-ATX and mini-ITX system assemblies without excessive desk loading.
Internal layout engineering reserves 32 mm of dedicated clearance behind the motherboard tray, facilitating clean routing for 24-pin and peripheral cables. The lower power supply chamber accommodates units up to 160 mm in length and incorporates a dedicated cable cutout on the upper shroud to route auxiliary PCIe power directly to GPUs measuring up to 309 mm. Front-panel input/output integrates a USB 3.2 Gen 1 Type-C port, a USB 3.0 Type-A port, unified 3.5 mm audio, and a dual-mode LED control button capable of cycling onboard lighting loops or toggling motherboard ARGB synchronization via a prolonged press.
Active air movement is established out of the box via three pre-installed 120 mm ARGB fans arranged across two top exhaust positions and a single rear exhaust port. Removable dust filters positioned at the top, right side panel, and chassis floor mitigate particle buildup across passive intake paths. With four expansion slots, a 165 mm CPU cooler height ceiling, and storage mounting confined to one 3.5-inch drive and one 2.5-inch drive, the enclosure prioritizes streamlined, aesthetically driven compact builds over dense multi-drive workstation arrays.
Technical Specifications
| Brand | Okinos |
| Model | Aqua UNO |
| Form Factor | Mini Tower |
| Motherboard Support | Micro-ATX, Mini-ITX |
| Chassis Dimensions | 315 x 210 x 395 mm (D x W x H) |
| Chassis Weight | 3.94 kg |
| Panel Design | 270-degree pillarless tempered glass (front and left side), tool-free quick-release |
| Expansion Slots | 4 |
| Drive Bays | 1x 3.5-inch internal, 1x 2.5-inch internal |
| Max Gpu Length | 309 mm |
| Max Cpu Cooler Height | 165 mm |
| Max Psu Length | 160 mm |
| Cable Management Clearance | 32 mm |
| Pre Installed Fans | 3x 120 mm ARGB fans (2x top, 1x rear) |
| Dust Filtration | Top, right side, and bottom detachable filters |
| Front Io Ports | 1x USB 3.2 Gen 1 Type-C, 1x USB 3.0 Type-A, 3.5 mm audio jack, Power, LED control button (long press motherboard sync) |
- Pillarless 270-degree dual tempered glass panels with tool-free quick-release retention
- Generous 32 mm rear cable routing depth with dedicated GPU power pass-through shroud cutout
- Includes three pre-installed 120 mm ARGB fans and front USB 3.2 Gen 1 Type-C connectivity
- Detachable dust filtration across top, right side panel, and floor intake vents
- Maximum graphics card clearance is constrained to 309 mm
- Storage expansion is limited to a single 3.5-inch bay and one 2.5-inch bay
- Chassis accommodates only Micro-ATX and Mini-ITX motherboards across 4 expansion slots
Primary Sources & Audited Citations
Recommended Alternatives in PC Cases
At a Glance
How reliable is the Okinos Aqua UNO according to Mizex audits?
An ideal choice for builders seeking an affordable, panoramic showpiece micro-ATX case with pre-installed fans, provided component lengths stay under 309 mm for GPUs and 160 mm for power supplies.
What are the known quirks or drawbacks of the Okinos Aqua UNO?
Our reliability audit identified the following documented caveats:
- Maximum graphics card clearance is constrained to 309 mm
- Storage expansion is limited to a single 3.5-inch bay and one 2.5-inch bay
- Chassis accommodates only Micro-ATX and Mini-ITX motherboards across 4 expansion slots
What are the key engineering highlights of the Okinos Aqua UNO?
The top strengths recorded in our evaluation include:
- Pillarless 270-degree dual tempered glass panels with tool-free quick-release retention
- Generous 32 mm rear cable routing depth with dedicated GPU power pass-through shroud cutout
- Includes three pre-installed 120 mm ARGB fans and front USB 3.2 Gen 1 Type-C connectivity
- Detachable dust filtration across top, right side panel, and floor intake vents