MOAIPLAY ORA PRO G1 1000

MOAIPLAY ORA PRO G1 1000
▲ DOCUMENTED QUIRKS
Site Score
4.1 / 5.0
Buyer Guidance: A capable 1000W ATX 3.1 power supply engineered for quiet high-wattage operation, though buyers focused on multi-year fan endurance should weigh the Yate Loon bearing component.
Mizex Audit Breakdown
Engineering & Core Performance (30%) 4.3 / 5.0
Build Quality & Physical Design (20%) 4.1 / 5.0
Thermal, Power & Acoustics (20%) 4.2 / 5.0
Reliability & Stability (20%) 3.7 / 5.0
Buyer Value (10%) 4.2 / 5.0
Score Rationale
The composite score of 4.1 is anchored by strong platform engineering (4.3) featuring ATX 3.1 compliance, 1000W output, and Cybenetics verification. Build quality (4.1) is reinforced by a clean ATX casing and fully modular connector panel. Thermal management and acoustics (4.2) perform well due to the large 148mm cooling fan's low-RPM profile. Long-term reliability (3.7) reflects enthusiast scrutiny regarding the longevity of the Yate Loon fan mechanism, while buyer value (4.2) remains high given the platform's power density and forward compatibility.
Audited today
ⓘ Multi-Dimensional Index evaluated across 5 core engineering pillars. Refresh requests open every 60 days.
👥 Community Score
Community Score
— / 5.0
No community ratings submitted yet. Be the first to record your experience.
Your Community Audit
— / 5.0
Rate the 5 Sub-Index categories matching the site audit for a fair direct comparison:
Engineering & Core Performance (30%) —
Build Quality & Physical Design (20%) —
Thermal, Power & Acoustics (20%) —
Reliability & Stability (20%) —
Buyer Value (10%) —
or to submit.
💬 Join the Discussion ↓
Scores adjust dynamically as verified community ratings accumulate.

Overview

The MOAIPLAY ORA PRO G1 1000 is an ATX-format power supply delivering up to 1000 watts of sustained power while adhering strictly to the ATX 3.1 standard. Its electrical platform is certified through Cybenetics testing protocols, confirming baseline operational efficiency and modern load compliance. The chassis integrates a fully modular cable management architecture, enabling builders to install only necessary system harnesses and optimize chassis interior volume for unobstructed airflow.

Thermal regulation and acoustic containment are governed by an oversized 148mm cooling fan sourced from Yate Loon, which leverages increased blade surface area to sustain adequate static pressure at lower operational RPMs. While this larger diameter promotes quieter operation under heavy system loads, the reliance on a Yate Loon fan introduces documented long-term reliability questions among desktop enthusiasts regarding bearing longevity over prolonged service intervals. For current-generation desktop platforms, the unit delivers high wattage capacity and compliant power excursion handling within a standardized ATX enclosure.

Technical Specifications

Total Power Output 1000 Watts
Form Factor ATX
Standard Compliance ATX 3.1
Modularity Fully Modular
Fan Diameter 148 mm
Fan Manufacturer Yate Loon
Efficiency Certification Cybenetics
✔ Pros
  • Full compliance with ATX 3.1 standards and high 1000W output capacity
  • Oversized 148mm cooling fan delivers high airflow at reduced acoustic levels
  • Fully modular cable configuration enables clean chassis airflow and installation
  • Independently validated under Cybenetics testing protocols
✖ Cons
  • Yate Loon fan implementation carries mixed historical feedback regarding long-term bearing reliability
📋

Primary Sources & Audited Citations

Where To Buy

Official Store
Check Retailer
Amazon
Check Retailer
Newegg
Check Retailer

Disclosure: Mizex is an independent hardware database & audit index. When you purchase through retailer links on our site, we may earn an affiliate commission at no additional cost to you.

100% Sponsor-Free Platform
Zero paid placement • Zero brand bias

Support Independent Hardware Research

Mizex is an independent hardware intelligence platform. We accept zero manufacturer sponsorships, paid product reviews, or promotional placements. Every hardware profile, specification breakdown, and reliability rating is researched objectively from public documentation and verified community telemetry. If our database helped guide your build or purchase, consider supporting our research.

✓ Community-Driven ✓ Open Research ✓ 100% Objective Data
Request a Profile →

Community Discussion