- UniSheet thermoformed tempered glass with a 7.5 mm (0.30 in) bend radius provides an unobstructed 270-degree view without a corner pillar.
- Repositionable magnetic airflow dividers and transparent deflector plates channel base intake air directly into the vertical GPU, lowering core temperatures by up to 4°C.
- Native support for reverse-connector motherboards including ASUS BTF and MSI Project Stealth simplifies clean cable routing.
- Bundled PCIe 5.0 x16 riser cable and dual 360 mm radiator capacity deliver forward-looking component compatibility.
- Substantial unladen chassis weight of 29.32 lbs (13.3 kg) demands a reinforced desk setup and careful handling.
- CPU air cooler clearance is restricted to a maximum height of 6.69 in (170 mm).
Overview
Chassis construction centers around a continuous UniSheet thermoformed tempered glass panel with a 7.5 mm (0.30 in) bend radius, eliminating the traditional front-corner structural pillar to provide an unbroken 270-degree internal perspective across the 61.9-liter dual-chamber footprint. Fabricated from heavy-gauge SGCC steel, the enclosure maintains rigid structural tolerances despite its pillarless format, anchoring a substantial unladen chassis weight of 29.32 lbs (13.3 kg). Structural accommodations specifically target current and next-generation mainboard standards, incorporating native cutouts for back-connect motherboards including ASUS BTF and MSI Project Stealth alongside standard ATX layouts to conceal wiring paths within the rear chamber.
Internal thermal engineering addresses the traditional cooling penalty of panoramic vertical graphics card layouts through a dedicated directional ducting system. Rather than relying on unguided bottom draft, an angled bottom intake plate works in tandem with repositionable magnetic airflow dividers and dual transparent deflector plates to route floor intake air directly into the vertical GPU intake fans, reducing core temperatures by up to 4°C under sustained load. The chassis integrates an included PCIe 5.0 x16 riser cable to maintain signal integrity for high-bandwidth accelerators without relying on third-party adapters. Acoustic isolation is reinforced through molded rubber isolation grommets across fan mounting interfaces to dampen mechanical vibration transmission into the steel frame.
Cooling scalability accommodates up to eleven 120 mm fans with simultaneous support for dual 360 mm liquid-cooling radiators along the top and side brackets, while CPU tower cooler clearance is capped at 6.69 in (170 mm). Front-panel connectivity delivers high-speed peripheral routing through a dedicated 20 Gbps USB 3.2 Gen 2×2 Type-C interface. Notably, the chassis eschews proprietary software-driven digital controller hubs in favor of standard system-level headers, eliminating software overhead, driver conflicts, and firmware-dependent failure vectors across long-term deployment.
Technical Specifications
| Model | HAVN HS 360 |
| Form Factor | Dual-Chamber Mid-Tower |
| Enclosure Volume | 61.9 L |
| Unladen Weight | 29.32 lbs (13.3 kg) |
| Chassis Materials | SGCC Steel, UniSheet Thermoformed Tempered Glass |
| Glass Bend Radius | 0.30 in (7.5 mm) |
| Panoramic View Angle | 270 degrees |
| Motherboard Support | ATX, Reverse-Connector ATX (ASUS BTF, MSI Project Stealth) |
| Maximum CPU Cooler Height | 6.69 in (170 mm) |
| Fan Capacity | Up to 11x 120 mm fans |
| Radiator Support | Simultaneous dual 360 mm radiators (top and side brackets) |
| GPU Mounting | Vertical orientation with included PCIe 5.0 x16 riser cable |
| Airflow System | Repositionable magnetic airflow divider, dual transparent deflector plates, angled bottom intake plate |
| Front I/O | 1x USB 3.2 Gen 2x2 Type-C (20 Gbps) |
| Acoustic Damping | Molded rubber isolation grommets |
Primary Sources & Audited Citations
- HAVN's HS 360 case is lighter, smaller, and enhances airflow to keep your GPU nice and cool
- Havn is making a smaller, lighter version of the excellent HS 420, with a few convenient upgrades too
- HAVN HS 360 Review: Dedicated Airflow Guides Drop GPU Thermals - Mizex
- Solving the GPU Airflow Problem | Bouncing Air in the HAVN HS 360
Recommended Alternatives in PC Cases
At a Glance
How reliable is the HAVN HS 360 Review: Dedicated Airflow Guides Drop GPU Thermals according to Mizex audits?
The HAVN HS 360 is an exemplary dual-chamber showcase for enthusiasts demanding targeted vertical GPU cooling and seamless reverse-connector cable routing, provided the 29.32 lbs (13.3 kg) unladen weight and 6.69 in (170 mm) cooler clearance align with your configuration.
What are the known quirks or drawbacks of the HAVN HS 360 Review: Dedicated Airflow Guides Drop GPU Thermals?
Our reliability audit identified the following documented caveats:
- Substantial unladen chassis weight of 29.32 lbs (13.3 kg) demands a reinforced desk setup and careful handling.
- CPU air cooler clearance is restricted to a maximum height of 6.69 in (170 mm).
What are the key engineering highlights of the HAVN HS 360 Review: Dedicated Airflow Guides Drop GPU Thermals?
The top strengths recorded in our evaluation include:
- UniSheet thermoformed tempered glass with a 7.5 mm (0.30 in) bend radius provides an unobstructed 270-degree view without a corner pillar.
- Repositionable magnetic airflow dividers and transparent deflector plates channel base intake air directly into the vertical GPU, lowering core temperatures by up to 4°C.
- Native support for reverse-connector motherboards including ASUS BTF and MSI Project Stealth simplifies clean cable routing.
- Bundled PCIe 5.0 x16 riser cable and dual 360 mm radiator capacity deliver forward-looking component compatibility.