- 1,800W continuous output with 3,600W peak surge handling in a 24.8 lb (11.25 kg) chassis
- Automotive-grade EVE LiFePO4 cells rated for over 4,000 cycles to 80% capacity
- Fast 1,200W AC charging reaching 80% in 45 minutes and 100% in ~68 minutes
- Sub-10ms UPS transfer switchover with automatic bypass and output memory recovery
- Fixed 1,024Wh battery capacity without modular expansion pack support
- Output interface restricted to 7 total ports
Overview
High-density bidirectional power conversion establishes the core topology of the FOSSiBOT F1800, pairing an 1,800W pure sine wave inverter with a 1,024Wh battery bank capable of absorbing peak surges up to 3,600W. Internal energy storage relies on automotive-grade EVE Lithium Iron Phosphate (LiFePO4) cells rated to sustain over 4,000 cycles before reaching 80% retained capacity. Grid replenishment is executed through a 1,200W AC input stage that charges the pack to 80% in 45 minutes and achieves full saturation in approximately 68 minutes, complemented by an integrated 500W MPPT solar controller capable of a full recharge in roughly 2 hours under optimal sunlight.
Encased in an impact-resistant shell measuring 14.6 x 8.1 x 10.2 in (371 x 206 x 258 mm) and weighing 24.8 lbs (11.25 kg), the chassis incorporates balanced integrated carry handles and a 7-port output layout. Internal thermal management maintains acoustic output at approximately 30 dB during active loads. Embedded firmware, managed via the FOSSiBOT App, supports automated bypass routing, low-battery cutoff thresholds, and memory recovery to restore active circuit states following power cutoffs. For uninterruptible backup setups, the hardware executes automatic power transfers in under 10 milliseconds, preventing shutdowns for sensitive connected electronics.
Technical Specifications
| Brand | FOSSiBOT |
| Model | F1800 |
| Battery Capacity | 1,024 Wh |
| Battery Chemistry | EVE LiFePO4 (Lithium Iron Phosphate) |
| Cycle Life | 4,000+ cycles to 80% capacity |
| Continuous AC Output | 1,800 W |
| Peak Surge Output | 3,600 W |
| AC Recharging Input | 1,200 W |
| AC Recharging Time | 0-80% in 45 min, 0-100% in ~68 min |
| Solar Recharging Input | 500 W max |
| Solar Recharging Time | 0-100% in ~2 hours (at 500 W) |
| UPS Transfer Time | <10 ms |
| Total Output Ports | 7 |
| Acoustic Noise (Load) | ~30 dB |
| Dimensions | 14.6 x 8.1 x 10.2 in (371 x 206 x 258 mm) |
| Weight | 24.8 lbs (11.25 kg) |
| Recharging Sources | AC wall outlet, solar panel, AC + solar, generator |
| Mobile Application | FOSSiBOT App (monitoring and power management) |
| Firmware Features | ECO Mode, automatic bypass switching, low-battery protection, output memory recovery |
Primary Sources & Audited Citations
Recommended Alternatives in Power Stations & UPS
At a Glance
How reliable is the FOSSiBOT F1800 Review: Compact High-Surge LiFePO4 Station according to Mizex audits?
An excellent pick for workstations and home backup requiring rapid sub-10ms UPS switching and high surge overhead, provided fixed 1,024Wh capacity and 7 output ports satisfy your needs.
What are the known quirks or drawbacks of the FOSSiBOT F1800 Review: Compact High-Surge LiFePO4 Station?
Our reliability audit identified the following documented caveats:
- Fixed 1,024Wh battery capacity without modular expansion pack support
- Output interface restricted to 7 total ports
What are the key engineering highlights of the FOSSiBOT F1800 Review: Compact High-Surge LiFePO4 Station?
The top strengths recorded in our evaluation include:
- 1,800W continuous output with 3,600W peak surge handling in a 24.8 lb (11.25 kg) chassis
- Automotive-grade EVE LiFePO4 cells rated for over 4,000 cycles to 80% capacity
- Fast 1,200W AC charging reaching 80% in 45 minutes and 100% in ~68 minutes
- Sub-10ms UPS transfer switchover with automatic bypass and output memory recovery