Jungle Leopard Prism4 Ultra 120mm ARGB White Reverse vs Gamdias Notus M1-1201 ARGB
Standardized 5-pillar engineering audit, thermal telemetry, verified longevity metrics, and complete technical specification diff.
Reverse-blade 120 mm intake fan combining dual-axis infinity lighting and 6-unit daisy chaining with a 29 dBA acoustic floor.
A versatile 120 mm PWM chassis fan pairing interchangeable forward/reverse impellers with reliable hydraulic bearings and standard ARGB connectivity.
Mizex Comparative Audit Verdict
5-Pillar Engineering Telemetry
Detailed comparison across standardized normalized 1.0 – 5.0 engineering pillars.
Jungle Leopard Prism4 Ultra 120mm ARGB White Reverse: Strengths & Caveats
- Reverse airflow blade orientation presents an unobstructed front impeller face in intake positions
- Dual-axis infinity mirror design creates a deep 3D tunnel effect on both the hub and outer frame
- Integrated male and female ARGB headers permit daisy chaining up to 6 fans on a single run
- Delivers 58.36 CFM of directed airflow through a 9-blade frosted rotor assembly
- Rated noise level of 29 dBA creates an audible operational hum under full rotational load
- 58.36 CFM throughput is tuned for chassis intake rather than high-impedance liquid cooling radiators
Gamdias Notus M1-1201 ARGB: Strengths & Caveats
- Interchangeable forward and reverse blade assemblies allow clean intake aesthetic without exposed frame struts
- Standard 4-pin PWM and 3-pin 5V ARGB connectors eliminate proprietary controller lock-in
- Broad 400 to 1600 RPM PWM control range supported by hydraulic bearing and corner dampening pads
- Peak static pressure of 1.75 mmH2O is tailored primarily for chassis ventilation rather than restrictive liquid cooling radiators
- Swappable rotor mechanism requires manual blade detachment and careful hub reseating during configuration
Technical Specification Comparison
Side-by-side spec alignment. Rows highlighted with subtle shading denote differing specifications.
| Specification | Jungle Leopard Prism4 Ultra 120mm ARGB White Reverse | Gamdias Notus M1-1201 ARGB |
|---|---|---|
| Brand DIFF | Jungle Leopard | Gamdias |
| Model DIFF | Prism4 Ultra 120mm ARGB White Reverse | Gamdias Notus M1-1201 ARGB |
| Fan Size DIFF | 4.72 in (120 mm) | — |
| Frame Color DIFF | White | — |
| Blade Orientation DIFF | Reverse airflow | — |
| Blade Count DIFF | 9 | — |
| Blade Finish DIFF | Frosted | — |
| Rated Airflow DIFF | 58.36 CFM | — |
| Rated Noise Level DIFF | 29 dBA | — |
| Lighting Type | Addressable RGB (ARGB) | Addressable RGB (ARGB) |
| Lighting Effects DIFF | Dual infinite mirror (side bevel and center axis 3D tunnel) | — |
| Daisy Chain Capacity DIFF | Up to 6 units | — |
| Dimensions DIFF | — | 120 × 120 × 25 mm (4.72 x 4.72 x 0.98 in) |
| Fan Size Mm DIFF | — | 120 |
| Fan Speed Rpm DIFF | — | 400–1600 RPM (±10%) |
| Max Airflow Cfm DIFF | — | 57.56 |
| Max Static Pressure Mmh2o DIFF | — | 1.75 |
| Bearing Type DIFF | — | Hydraulic bearing |
| Led Count DIFF | — | 8 |
| Connectors DIFF | — | 4-pin PWM, 3-pin ARGB (5V) |
| Rated Voltage DIFF | — | 12 V (fan) / 5 V (LED) |
| Pwm Support DIFF | — | Yes |
| Blade Design DIFF | — | Interchangeable forward and reverse rotors |
| Vibration Damping DIFF | — | Integrated corner rubber pads |
Need to evaluate a different configuration?
🔍 Compare Other Hardware