JetKVM vs Satechi On-the-Go 5-in-1 USB-C Hub
Standardized 5-pillar engineering audit, thermal telemetry, verified longevity metrics, and complete technical specification diff.
A highly capable open-source IP-KVM delivering 1080p60 encoding with sub-60ms latency in a rugged zinc chassis, offset by cramped I/O spacing and a persistent display backlight.
A well-machined magnetic travel hub combining stable 4K@60Hz video and 5Gbps data transfer, bounded primarily by a 60W Power Delivery ceiling and captive cable design.
Mizex Comparative Audit Verdict
5-Pillar Engineering Telemetry
Detailed comparison across standardized normalized 1.0 – 5.0 engineering pillars.
JetKVM: Strengths & Caveats
- Hardware-accelerated 1080p @ 60 FPS capture with low 30–60 ms encoding latency
- Fully open-source Linux and Go-based software stack with public GitHub repository
- Rugged die-cast zinc alloy chassis with passive thermal dissipation
- RJ11 extension header enabling remote ATX power button and DC relay switching
- Less than 1 mm clearance between Mini-HDMI and RJ45 ports blocks bulky or booted Ethernet connectors
- Touchscreen backlight lacks a software sleep timer and remains permanently illuminated
- Unpowered host shutdowns drop connectivity unless paired with an external 5V power supply or USB standby port
Satechi On-the-Go 5-in-1 USB-C Hub: Strengths & Caveats
- Full 4K@60Hz video output over HDMI 2.0 via DP Alt Mode
- Integrated magnetic base for secure attachment to MagSafe phones or laptop lids
- Durable anodized aluminum unibody enclosure with reinforced braided cable
- Independent 5Gbps USB-A and USB-C data channels alongside UHS-I SD reader
- Power Delivery pass-through is capped at 60W, limiting high-draw laptop charging
- Non-detachable integrated host cable prevents user replacement if worn
Technical Specification Comparison
Side-by-side spec alignment. Rows highlighted with subtle shading denote differing specifications.
| Specification | JetKVM | Satechi On-the-Go 5-in-1 USB-C Hub |
|---|---|---|
| Brand DIFF | JetKVM | Satechi |
| Model DIFF | JetKVM | On-the-Go 5-in-1 USB-C Hub |
| Processor (SoC) DIFF | Rockchip RV1106G3 (ARM Cortex-A7 @ 1.0 GHz) | — |
| Hardware Video Encoder DIFF | Hardware H.264 and H.265 VPU | — |
| System Memory DIFF | 256 MB on-chip DDR3L | — |
| Onboard Storage DIFF | 16 GB eMMC flash | — |
| Integrated Display DIFF | 1.69-inch IPS capacitive touchscreen (280 x 240 resolution) | — |
| Video Input Interface DIFF | Mini-HDMI (up to 1080p @ 60 FPS) | — |
| Encoding Latency DIFF | 30–60 ms | — |
| Network Interface DIFF | 100 Mbps Ethernet (RJ45) | — |
| USB Interface DIFF | USB 2.0 Type-C (480 Mbps) for power and HID emulation | — |
| Expansion Interface DIFF | RJ11 extension port (supports ATX and DC power control boards) | — |
| Power Input DIFF | 5V via USB Type-C or 5V via RJ11 extension port | — |
| Chassis Material DIFF | Die-cast zinc alloy | Anodized Aluminum with Magnetic Base |
| Dimensions DIFF | 2.36 x 1.69 x 1.22 in (60 x 43 x 31 mm) | 65 x 65 x 22 mm (2.56 x 2.56 x 0.87 in) |
| Firmware Stack DIFF | Open-source Linux and Go-based application stack | — |
| Hardware Category DIFF | — | USB Hubs & Docks |
| Host Interface DIFF | — | USB-C (Integrated braided cable) |
| Video Output DIFF | — | 1x HDMI 2.0 (Up to 4K @ 60Hz) |
| Power Delivery Input DIFF | — | USB-C PD pass-through up to 60W |
| Data Ports DIFF | — | 1x USB-C 3.2 Gen 1 (5Gbps), 1x USB-A 3.2 Gen 1 (5Gbps) |
| Card Reader DIFF | — | 1x SD UHS-I (Up to 104 MB/s) |
| Mounting DIFF | — | MagSafe compatible / Magnetic attachment |
| Weight DIFF | — | 64 g (2.3 oz) |
| Cooling DIFF | — | Passive aluminum heatsink dissipation |
Need to evaluate a different configuration?
🔍 Compare Other Hardware