Eaton 5P Gen2 5P1500RTNG2 vs Anker SOLIX S2000
Standardized 5-pillar engineering audit, thermal telemetry, verified longevity metrics, and complete technical specification diff.
Full 1440 W unity power factor and bundled Gigabit network management establish an enterprise-grade line-interactive benchmark for 2U edge infrastructure.
An exceptionally durable and portable 2,010 Wh backup station pairing 10,000-cycle LFP cells and 10ms UPS switching with a conservative 1,500W continuous inverter ceiling.
Mizex Comparative Audit Verdict
5-Pillar Engineering Telemetry
Detailed comparison across standardized normalized 1.0 – 5.0 engineering pillars.
Eaton 5P Gen2 5P1500RTNG2: Strengths & Caveats
- Full unity power factor delivering 1440 W output matched to 1440 VA capacity
- Pre-installed NETWORK-M3 network management card for out-of-the-box remote administration
- Line-interactive topology with Automatic Voltage Regulation to mitigate voltage fluctuations
- Versatile 2U rackmount or tower form factor featuring 8 NEMA 5-15R receptacles
- Extended 9-hour recharge cycle required to achieve full battery capacity after deep discharge
Anker SOLIX S2000: Strengths & Caveats
- Significantly lighter and more compact than class predecessors at 35.7 lbs (16.2 kg) for 2,010 Wh capacity
- Industry-leading 314 Ah LFP cells rated for 10,000 cycles to 60% capacity
- OptiSave architecture maintains ultra-low idle draw down to 2W off and under 6W with AC enabled
- Fast 10ms automated UPS transfer time ensures uninterrupted backup power
- Continuous AC output is capped at 1,500W (1,800W bypass), limiting simultaneous high-draw appliances
- Limited peripheral connectivity with only 3 USB ports
Technical Specification Comparison
Side-by-side spec alignment. Rows highlighted with subtle shading denote differing specifications.
| Specification | Eaton 5P Gen2 5P1500RTNG2 | Anker SOLIX S2000 |
|---|---|---|
| Model DIFF | Eaton 5P Gen2 5P1500RTNG2 | SOLIX S2000 |
| Topology DIFF | Line-Interactive | — |
| Power Capacity (VA) DIFF | 1440 VA | — |
| Power Capacity (Watts) DIFF | 1440 W | — |
| Power Factor DIFF | 1.0 (Unity) | — |
| Nominal Input Voltage DIFF | 120 V | — |
| Form Factor DIFF | 2U Rackmount / Tower | — |
| Output Receptacles DIFF | 8 x NEMA 5-15R | — |
| Voltage Regulation DIFF | Automatic Voltage Regulation (AVR) | — |
| Recharge Time DIFF | 9 hours | — |
| Network Management DIFF | Pre-installed NETWORK-M3 card | — |
| Brand DIFF | — | Anker |
| Battery Capacity DIFF | — | 2,010 Wh |
| Battery Chemistry DIFF | — | LiFePO4 (LFP) |
| Cell Rating DIFF | — | 314 Ah |
| Cycle Life DIFF | — | 10,000 cycles to 60% capacity |
| Continuous AC Output DIFF | — | 1,500W |
| Bypass Mode AC Output DIFF | — | 1,800W |
| UPS Transfer Time DIFF | — | 10 ms |
| AC Outlets DIFF | — | 5 (Front and rear split) |
| USB Ports DIFF | — | 3 |
| Idle Power Consumption DIFF | — | 2W (Outlets off) / Under 6W (AC active) |
| Certifications DIFF | — | TÜV SÜD A+ Runtime |
| Dimensions DIFF | — | 7.9 x 11.0 x 12.6 in (20 x 28 x 32 cm) |
| Weight DIFF | — | 35.7 lbs (16.2 kg) |
Need to evaluate a different configuration?
🔍 Compare Other Hardware