DJI Power 1000 V2 vs Anker SOLIX S2000
Standardized 5-pillar engineering audit, thermal telemetry, verified longevity metrics, and complete technical specification diff.
A masterclass in power electronics featuring 2600W AC output, potted inverter encapsulation, and 26 dB acoustics, slightly constrained by proprietary DC interface ports.
An exceptionally durable and portable 2,010 Wh backup station pairing 10,000-cycle LFP cells and 10ms UPS switching with a conservative 1,500W continuous inverter ceiling.
Mizex Comparative Audit Verdict
5-Pillar Engineering Telemetry
Detailed comparison across standardized normalized 1.0 – 5.0 engineering pillars.
DJI Power 1000 V2: Strengths & Caveats
- High 2600W continuous pure sine wave output with a 10ms UPS cutover for sensitive equipment
- Rapid recharge speeds achieving 80% capacity in 37 minutes via AC and 100% in 40 minutes via solar
- Dual independent 140W USB-C ports delivering up to 280W total under the PD 3.0 EPR protocol
- Robust 10mm potting compound encapsulation and quiet 26 dB acoustic profile under load
- Requires proprietary DJI SDC cables and adapters for standard MC4 solar and 12V car charging
- Closely spaced AC sockets restrict simultaneous installation of bulky power adapters
Anker SOLIX S2000: Strengths & Caveats
- Significantly lighter and more compact than class predecessors at 35.7 lbs (16.2 kg) for 2,010 Wh capacity
- Industry-leading 314 Ah LFP cells rated for 10,000 cycles to 60% capacity
- OptiSave architecture maintains ultra-low idle draw down to 2W off and under 6W with AC enabled
- Fast 10ms automated UPS transfer time ensures uninterrupted backup power
- Continuous AC output is capped at 1,500W (1,800W bypass), limiting simultaneous high-draw appliances
- Limited peripheral connectivity with only 3 USB ports
Technical Specification Comparison
Side-by-side spec alignment. Rows highlighted with subtle shading denote differing specifications.
| Specification | DJI Power 1000 V2 | Anker SOLIX S2000 |
|---|---|---|
| Brand DIFF | DJI | Anker |
| Model DIFF | Power 1000 V2 | SOLIX S2000 |
| Model Number DIFF | DYM1000V2H | — |
| Battery Capacity DIFF | 1024 Wh (51.2V, 20Ah) | 2,010 Wh |
| Battery Chemistry DIFF | LiFePO4 (Lithium Iron Phosphate) | LiFePO4 (LFP) |
| Continuous AC Output DIFF | 2600 W | 1,500W |
| AC Bypass Output DIFF | 2200 W | — |
| UPS Transfer Time | 10 ms | 10 ms |
| AC Input Charging DIFF | 1500 W (80% in 37 min, 100% in 56 min) | — |
| Solar Input Charging DIFF | 1800 W max (100% in 40 min via SDC) | — |
| Car Charging Input DIFF | 1000 W max (100% in 78 min) | — |
| USB C Ports DIFF | 2x 140W max (280W combined, PD 3.0 / EPR up to 28V/5A) | — |
| USB A Ports DIFF | 2x 24W max | — |
| DC Expansion Interfaces DIFF | 1x SDC (up to 3000W in / 2200W out), 1x SDC Lite (up to 400W in / 240W out) | — |
| Cooling Fans DIFF | Dual Foxconn PVA080G12W (8012 size, 12V 1.5A 4-pin PWM) | — |
| Acoustic Noise (Under Load) DIFF | 26 dB | — |
| Microcontroller DIFF | GigaDevice GD32L233RCT6 (ARM Cortex-M23, 256KB Flash, 32KB SRAM) | — |
| Environmental Protection DIFF | 10mm potting compound encapsulation, sub-nano coating, flame-retardant chassis | — |
| Operating Temperature (Discharge) DIFF | 14°F to 113°F (-10°C to 45°C) | — |
| Operating Temperature (Charge) DIFF | 32°F to 113°F (0°C to 45°C) | — |
| Dimensions DIFF | 17.56 x 8.98 x 9.21 in (446 x 228 x 234 mm) | 7.9 x 11.0 x 12.6 in (20 x 28 x 32 cm) |
| Weight DIFF | 31.42 lbs (14.25 kg) | 35.7 lbs (16.2 kg) |
| Cell Rating DIFF | — | 314 Ah |
| Cycle Life DIFF | — | 10,000 cycles to 60% capacity |
| Bypass Mode AC Output DIFF | — | 1,800W |
| AC Outlets DIFF | — | 5 (Front and rear split) |
| USB Ports DIFF | — | 3 |
| Idle Power Consumption DIFF | — | 2W (Outlets off) / Under 6W (AC active) |
| Certifications DIFF | — | TÜV SÜD A+ Runtime |
Need to evaluate a different configuration?
🔍 Compare Other Hardware