Side-by-Side Comparison
8Sight T100 vs Stepwise Tap
Standardized 5-pillar engineering audit, thermal telemetry, verified longevity metrics, and complete technical specification diff.
● HIGHLY RATED
Composite Score:
4.4
/ 5.0
Compact, NDAA-compliant LWIR edge module delivering 60 FPS thermal capture and 600 GOPS onboard AI acceleration.
● HIGHLY RATED
Composite Score:
4.4
/ 5.0
A highly reliable, UL 916-certified dynamic load manager featuring a rugged NEMA 3R enclosure and flexible current sensing that circumvents costly service panel replacements.
⚖️
Mizex Comparative Audit Verdict
Both the 8Sight T100 and Stepwise Tap share an identical composite score of 4.4. Choice between them depends primarily on specific port requirements, physical dimensions, or pricing.
5-Pillar Engineering Telemetry
Detailed comparison across standardized normalized 1.0 – 5.0 engineering pillars.
8Sight T100
Stepwise Tap
Engineering & Architecture
(30%)
Winner: 8Sight T100 (+0.1)
4.6
4.5
Build Quality & Materials
(20%)
Tie
4.3
4.3
Thermal, Power & Acoustics
(20%)
Winner: Stepwise Tap (+0.1)
4.2
4.3
Real-World Reliability
(20%)
Tie
4.5
4.5
Buyer Value & Upgrades
(10%)
Tie
4.4
4.4
8Sight T100: Strengths & Caveats
✔ Advantages
- Onboard STM32N657 MCU with 600 GOPS NPU and hardware ISP for real-time edge intelligence
- High-speed 60 FPS Lynred LWIR thermal imaging with sensitive sub-50 mK NETD performance
- Dual Ethernet and USB interfaces supporting UVC, RTSP streaming, and uncompressed radiometric RAW data
- Ultra-light 38-gram form factor with NDAA and TAA regulatory compliance
✖ Documented Caveats
- JST harness connections require bespoke integration cabling rather than standard consumer ports
- High compute density in an unventilated micro-enclosure necessitates host-level conductive thermal dissipation
Stepwise Tap: Strengths & Caveats
✔ Advantages
- Certified to UL 916 standards as a dedicated Energy Management System
- Performs automatic load calculations every second to keep panel usage under the 80% threshold
- Weatherproof NEMA 3R enclosure certified for indoor and outdoor installations
- Flexible current sensors fit easily inside space-constrained electrical breaker panels
✖ Documented Caveats
- Configuration relies on manual onboard DIP switches rather than dynamic software provisioning
- Auxiliary telemetry and remote reporting require an active internet connection
Technical Specification Comparison
Side-by-side spec alignment. Rows highlighted with subtle shading denote differing specifications.
| Specification | 8Sight T100 | Stepwise Tap |
|---|---|---|
| Brand DIFF | 8Sight | Stepwise |
| Model DIFF | 8Sight T100 | Stepwise Tap |
| Microcontroller DIFF | STMicroelectronics STM32N657X0H3Q (Arm Cortex-M55 @ up to 800 MHz) | — |
| Neural Processing Unit DIFF | 600 GOPS Neural-ART Accelerator | — |
| Image Signal Processor DIFF | Dedicated Hardware ISP | — |
| System Memory DIFF | 32 MB (256 Mbit) RAM @ 200 MHz (16-bit) | — |
| Storage DIFF | 64 MB (512 Mbit) NOR Flash | — |
| Sensor Model DIFF | Lynred ATI320 LWIR (Long-Wave Infrared) | — |
| Spectral Range DIFF | 8 to 14 µm | — |
| Resolution DIFF | 320 x 240 pixels | — |
| Frame Rate DIFF | 60 FPS | — |
| Thermal Sensitivity Netd DIFF | < 50 mK | — |
| Image Pipeline Latency DIFF | < 50 ms | — |
| Ai Inference Time DIFF | < 100 ms (model-dependent) | — |
| Ethernet Interface DIFF | 100 Mbps Ethernet PHY via JST (MJPEG / H.264 over RTP, RTSP, RTCP) | — |
| Usb Interface DIFF | USB 2.0 High-Speed via JST (UVC MJPEG/H.264/YUV422; RAW8, RAW16) | — |
| Power Input DIFF | 5V DC via USB JST connector | — |
| Mounting Interface DIFF | 4x M2 mounting holes on four sides | — |
| Dimensions DIFF | 28.5 x 30.5 x 29.5 mm (1.12 x 1.20 x 1.16 in) | — |
| Weight DIFF | 38 g (1.3 oz) | — |
| Compliance DIFF | NDAA and TAA compliant | — |
| Device Type DIFF | — | Dynamic Load Manager |
| Certification DIFF | — | UL 916 (Energy Management System) |
| Enclosure Rating DIFF | — | NEMA 3R |
| Monitoring Interval DIFF | — | 1 second |
| Capacity Threshold DIFF | — | 80% Panel Capacity Limit |
| Configuration Interface DIFF | — | Onboard DIP switches |
| Sensor Architecture DIFF | — | Flexible current sensors |
| Connectivity DIFF | — | Internet connectivity |
| Supported Loads DIFF | — | EVSE (hardwired or outlet), resistive HVAC, pool pumps, hot tubs, electric water heaters |
| Installation Environment DIFF | — | Indoor or outdoor |
Need to evaluate a different configuration?
🔍 Compare Other Hardware