- PCIe Gen4 x4 NVMe interface rated up to 4,700 MB/s read and 4,200 MB/s write
- Universal M.2 2280 form factor fits both slim laptops and desktop motherboards
- Practical 1TB capacity for primary OS, application, and media installations
- Sequential throughput ceilings trail top-tier PCIe Gen4 x4 enthusiast drives
- Bare M.2 2280 module lacks an integrated heatsink for enclosed, low-airflow bays
Overview
Mainstream desktop and laptop upgrades often call for a practical middle ground between older PCIe Gen3 storage and top-tier workstation drives, and that everyday balance defines the CS2243. Built around the standard M.2 2280 footprint and a PCIe Gen4 x4 NVMe interface, this 1TB internal module (part number M280CS2243-1TB-RB) targets routine operating system responsiveness, application loading, and general media storage without requiring specialized chassis clearance.
Rated for sequential read speeds of up to 4,700 MB/s and sequential write speeds of up to 4,200 MB/s, the drive steps cleanly ahead of Gen3 saturation limits while remaining below the roughly 7,000 MB/s upper tier of Gen4 hardware. Because it ships in a compact M.2 2280 profile without an oversized factory heatsink, thermal dissipation under continuous read or write bursts depends on host system airflow or a motherboard’s built-in M.2 thermal pad, making proper slot placement helpful inside tightly enclosed laptops or compact cases.
In everyday use, 1TB of capacity provides ample room for an active OS partition alongside large applications and project folders. Prospective buyers running sustained scratch-disk workloads or heavy continuous file transfers should keep in mind that the published specification highlights peak sequential throughput rather than detailing controller topology, DRAM cache layout, or formal TBW endurance ratings, positioning the drive primarily for general-purpose client systems rather than demanding enterprise arrays.
Technical Specifications
| Brand | PNY |
| Model | CS2243 |
| Part Number | M280CS2243-1TB-RB |
| Capacity | 1TB |
| Form Factor | M.2 2280 |
| Interface | PCIe Gen4 x4 NVMe |
| Sequential Read Speed | Up to 4,700 MB/s |
| Sequential Write Speed | Up to 4,200 MB/s |
Recommended Alternatives in Storage (SSDs & HDDs)
At a Glance
How reliable is the PNY CS2243 1TB PCIe Gen4 x4 NVMe M.2 2280 Internal SSD according to Mizex audits?
A practical 1TB PCIe Gen4 x4 M.2 2280 upgrade for everyday laptops and desktops that delivers clear gains over Gen3 drives, provided you do not need flagship 7,000 MB/s throughput or published heavy-endurance specs.
What are the known quirks or drawbacks of the PNY CS2243 1TB PCIe Gen4 x4 NVMe M.2 2280 Internal SSD?
Our reliability audit identified the following documented caveats:
- Sequential throughput ceilings trail top-tier PCIe Gen4 x4 enthusiast drives
- Bare M.2 2280 module lacks an integrated heatsink for enclosed, low-airflow bays
What are the key engineering highlights of the PNY CS2243 1TB PCIe Gen4 x4 NVMe M.2 2280 Internal SSD?
The top strengths recorded in our evaluation include:
- PCIe Gen4 x4 NVMe interface rated up to 4,700 MB/s read and 4,200 MB/s write
- Universal M.2 2280 form factor fits both slim laptops and desktop motherboards
- Practical 1TB capacity for primary OS, application, and media installations