- 270-degree dual tempered glass panels with tool-free snap-on removal for fast access
- Supports GPUs up to 15.75 in (400 mm), CPU coolers up to 6.93 in (176 mm), and PSUs up to 7.87 in (200 mm)
- Top radiator mounting support up to 14.17 in (360 mm) with 3-fan or 7-fan PWM ARGB configurations
- Includes front-panel USB 3.2 Type-C alongside USB 3.0
- Wrap-around tempered glass front eliminates direct front-panel mesh airflow intake
- Tool-free snap-on glass panels require careful handling when moving the system
- Pre-installed fan count differs significantly between the 3-fan standard listing and the 7-fan Infinity Mirror variant
Overview
Unobstructed hardware visibility anchors the layout of this ATX mid-tower chassis, pairing a 270-degree dual tempered glass enclosure with tool-free snap-on panels for straightforward interior access. Rather than relying on captive thumbscrews along the perimeter, the snap-on glass design lets builders open the main compartment quickly during installation or routine dusting while preserving clean corner lines across the front and side glass intersection.
Inside the main chamber, internal clearances accommodate oversized modern components without forcing tight cable bends or front-mount compromises. Builders have room for graphics cards up to 15.75 in (400 mm), tower air coolers up to 6.93 in (176 mm), and power supplies up to 7.87 in (200 mm) on standard ATX motherboards. Front-panel connectivity includes both USB 3.2 Type-C and USB 3.0 ports, aligning the external I/O with current desktop motherboards.
Cooling capacity centers on a top radiator mount supporting up to 14.17 in (360 mm) liquid coolers alongside pre-installed fan packages that vary by configuration—three 4.72 in (120 mm) fans on the standard listing or seven Infinity Mirror PWM ARGB fans on the 7-fan Black variant. Because the wrap-around glass replaces a perforated front mesh intake, the chassis depends on multi-fan circulation and PWM fan speed control to move heat through the top exhaust while keeping everyday acoustics manageable.
Technical Specifications
| Brand | MUSETEX |
| Model | Y6 |
| Form Factor | ATX Mid-Tower |
| Motherboard Support | ATX |
| Panels | 270-degree dual tempered glass, tool-free snap-on design |
| Max GPU Length | 15.75 in (400 mm) |
| Max CPU Cooler Height | 6.93 in (176 mm) |
| Max PSU Length | 7.87 in (200 mm) |
| Top Radiator Support | Up to 14.17 in (360 mm) |
| Front I/O | USB 3.2 Type-C, USB 3.0 |
| Pre Installed Fans | 3x 4.72 in (120 mm) standard / 7x 4.72 in (120 mm) Infinity Mirror PWM ARGB (MUSETEX Y6 Black 7-fan variant) |
Primary Sources & Audited Citations
Recommended Alternatives in PC Cases
At a Glance
How reliable is the MUSETEX Y6 according to Mizex audits?
Choose the MUSETEX Y6 if you want tool-free 270-degree panoramic glass and generous clearance for long GPUs and 360 mm top radiators, while keeping an eye on which pre-installed fan bundle a retailer lists.
What are the known quirks or drawbacks of the MUSETEX Y6?
Our reliability audit identified the following documented caveats:
- Wrap-around tempered glass front eliminates direct front-panel mesh airflow intake
- Tool-free snap-on glass panels require careful handling when moving the system
- Pre-installed fan count differs significantly between the 3-fan standard listing and the 7-fan Infinity Mirror variant
What are the key engineering highlights of the MUSETEX Y6?
The top strengths recorded in our evaluation include:
- 270-degree dual tempered glass panels with tool-free snap-on removal for fast access
- Supports GPUs up to 15.75 in (400 mm), CPU coolers up to 6.93 in (176 mm), and PSUs up to 7.87 in (200 mm)
- Top radiator mounting support up to 14.17 in (360 mm) with 3-fan or 7-fan PWM ARGB configurations
- Includes front-panel USB 3.2 Type-C alongside USB 3.0