- Achieved top thermal chart leadership in GamersNexus PC case testing with six included PWM fans.
- Rotatable 90-degree iShift PSU mount with included extension cable and detachable shroud cover enlarges bottom intake airflow and eases cable routing.
- Real walnut or birch front trim paired with high-airflow metal mesh and a 0.16 in (4 mm) tempered glass side panel.
- Integrated CPU/GPU dual digital temperature display alongside 10Gbps USB Type-C front I/O and 11.2 in (285 mm) E-ATX support.
- Built-in ARGB/PWM fan hub only offers five available connections despite six pre-installed fans.
- Large full-tower footprint at 20.9 x 9.6 x 21.5 in (530 x 245 x 545 mm) with a 7.1 in (180 mm) max PSU length limit.
Overview
Most airflow-focused full towers look like wind tunnels bolted to a steel box, yet this chassis pairs benchmark-topping cooling performance with real walnut or birch front trim. Under the large-area metal mesh, Antec builds around its F-LUX airflow platform and loads six PWM fans right out of the box—three across the front intake, two mounted on the PSU shroud pulling air upward toward the GPU, and one rear exhaust. In GamersNexus PC case testing, that stock configuration propelled the chassis straight to the top of the thermal charts.
Building inside the steel, plastic, and 0.16 in (4 mm) tempered glass frame is refreshingly practical, especially around the power supply chamber. The iShift mount lets you install a PSU up to 7.1 in (180 mm) long either conventionally or rotated 90 degrees using the included extension cable, while a detachable left-side PSU shroud cover opens up bottom intake clearance and simplifies cable routing. Builders also get generous room for E-ATX motherboards up to 11.2 in (285 mm), eight expansion slots, four 3.5-inch or 2.5-inch bays alongside two dedicated 2.5-inch mounts, and front I/O packing dual USB 3.0 ports, 10Gbps USB Type-C, and a toggle for the integrated CPU/GPU dual digital temperature display.
The one odd oversight sits behind the motherboard tray. Although six PWM fans come pre-installed, the built-in ARGB and PWM fan hub only provides five available connections, leaving you to daisy-chain a pair or plug the sixth fan straight into a motherboard header. Once wired up, the mix of spacious top and front 120mm or 140mm fan mounts, triple 120mm shroud support, clean wood-and-steel styling, and proven thermal headroom makes this an ideal home for high-wattage systems.
Technical Specifications
| Brand | Antec |
| Model | Flux Pro |
| Form Factor | Full Tower |
| Dimensions (D X W X H) | 20.9 x 9.6 x 21.5 in (530 x 245 x 545 mm) |
| Materials | Steel, Plastic, 0.16 in (4 mm) Tempered Glass, Wood (Walnut on Black / Birch on White) |
| Motherboard Support | E-ATX (up to 11.2 in / 285 mm), ATX, Micro-ATX, ITX |
| Expansion Slots | 8 |
| Drive Bays | 4x 3.5-in or 2.5-in, 2x dedicated 2.5-in |
| Front I/O | Power, Reset, 2x USB 3.0, 1x USB Type-C 10Gbps, Headphone/Mic Combo Jack, Temp. Display Switch |
| Included Fans | 6x PWM (3x Front Intake, 2x PSU Shroud Intake, 1x Rear Exhaust) |
| Fan Support | Front: 3x 120mm / 3x 140mm; Top: 3x 120mm / 3x 140mm; PSU Shroud: 3x 120mm |
| Fan Controller | Built-in ARGB & PWM Hub (5 available connections) |
| PSU Mounting | Standard or 90-degree rotated iShift mount (included extension cable), detachable left shroud side |
| Max PSU Length | 7.1 in (180 mm) |
| Integrated Display | CPU/GPU Dual Digital Temperature Display |
| Airflow Platform | Antec F-LUX Platform (Patent No. 11259440) |
Primary Sources & Audited Citations
Recommended Alternatives in PC Cases
At a Glance
How reliable is the Antec Flux Pro according to Mizex audits?
Buy this if you run hot flagship components and want top-tier stock airflow with room for E-ATX boards; look at a smaller mid-tower instead if desk space is tight or your build does not need six fans.
What are the known quirks or drawbacks of the Antec Flux Pro?
Our reliability audit identified the following documented caveats:
- Built-in ARGB/PWM fan hub only offers five available connections despite six pre-installed fans.
- Large full-tower footprint at 20.9 x 9.6 x 21.5 in (530 x 245 x 545 mm) with a 7.1 in (180 mm) max PSU length limit.
What are the key engineering highlights of the Antec Flux Pro?
The top strengths recorded in our evaluation include:
- Achieved top thermal chart leadership in GamersNexus PC case testing with six included PWM fans.
- Rotatable 90-degree iShift PSU mount with included extension cable and detachable shroud cover enlarges bottom intake airflow and eases cable routing.
- Real walnut or birch front trim paired with high-airflow metal mesh and a 0.16 in (4 mm) tempered glass side panel.
- Integrated CPU/GPU dual digital temperature display alongside 10Gbps USB Type-C front I/O and 11.2 in (285 mm) E-ATX support.